Description and History of Site:-
Single arch cast iron road bridge with sandstone abutments designed by Thomas Wilson to a conceptual design by Henry Provis of Paddington, Engineer to the Grand Junction Canal and cast by Walkers of Rotherham Yorks. under the direction of William Yates, site engineer for Walkers using iron dowels and keys instead of bolts.

Construction began in June 1810 and was completed by September 29th 1810 when the first tolls were charged. Dated 1810 at the centre of the arch on each side.

The bridge was strengthened by wrought-iron plates added to the two centre bays in 1900 and a reinforced concrete deck on plastic foam placed over the bridge in 1976. Between them the cast-iron bridge has six segmental compound arched trusses with circular designs, each cast in eleven voussoir segments joined with mortice and tenon joints, spanning 17.68m. (58ft) and linked horizontally by diaphragm beam. The road-plate deck is set in continuous lugs and is carried by cambered beams which are joined to the arches by diminishing circles of square section bars in the spandrels. The carriageway has cast-iron railings each side, with four decorative stanchions between the stone end piers, and at the centre a raised lamp standard each side. HISTORY: constructed under an Act for the replacement of the road bridges at Newport Pagnell which gained Royal Assent in June 1809. Tickford Bridge is one of only three surviving bridges (only two in this country) of a notable series of cast-iron bridges cast by Walker and Co. The first was constructed in 1801 in Spanish Town in Jamaica which is similar to Tickford Bridge but in poor condition. The second is an estate bridge at Stratfield Saye in Hampshire built in 1802 which has cast-iron arches of a similar design of circles but the lower parts have straight divisions instead of circles, it is not so wide and the cast-iron balustrading is of a simpler design but also stretches along the abutments. Tickford Bridge is a foremost work of early cast-iron engineering, still surviving in near its original condition and taking modern traffic. It is a monument of national importance in the history of civil engineering and the use of cast iron.

Further Reading and References:-
Falconer, Keith. 'Guide to England's Industrial Heritage'. Batsford, 1980
Labrum, E A, Civil Engineering Heritage, Eastern and Central England, (1994), 183
Pevsner, N, Williamson, E, The Buildings of England: Buckinghamshire, (1994), 578
Harris, M P, 'Newport Pagnell's Iron Bridge' in Wolverton and District Archaeological Journal, Vol. I, (1968), 60-3

Help us improve this entry

The compilers welcome corrections or additional information on all sites.
Any information provided will be verified before appearing on the web site.

Email comments

Key Words :- single arch cast iron bridge

Address :- Tickford End, Newport Pagnell, Buckinghamshire
Grid Ref :- SP 87803 43825
Co-ordinates :- Lat 52.085823 , Long -0.719988
Local Authority :- Buckinghamshire Council
Pre 1974 County :- Buckinghamshire
Site Status :- Listed - Grade I
Historic England List No - 1125464,
Site Condition :- Operational site, in use for original purpose
Site Dates :- 1810 - current
Record Date :- 19 April 2022

Copyright :- cc-by-nc-sa 4.0 © John Suter